Do it yourself
Frequently asked questions about cars and motorcycles

Where is the fuse box located in the Renault Clio?

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Fuse box

The Renault Clio model 2 has two fuse boxes and a relay. The first fuse box is located inside the cabin, specifically behind the end of the dashboard on the driver's side. To access the box, remove the cover. The second fuse box is located under the bonnet, specifically on the left side near the battery. To access this box, open the bonnet and then remove the cover of the box. The relay box is located under the bonnet on the left side beneath the battery.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (1998-2005 / Clio 2, MK 2) The window regulator fuse of our second series Renault Clio is located inside the fuse box. The fuse box is situated in the engine compartment, in th…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The Renault Clio has two fuse boxes located inside it. The first fuse box is found within the cabin, specifically behind the lower left dashboard pan…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The attached video shows the complete fuse diagram for our Renault Clio. The fuses protect the electrical components of our van from short circuits a…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos