Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Renault Zoe

Model: Renault Zoe MK 1 - Years 2013-2024
Part: Service warning light

In this video, we will see how to reset the service light on a 2020 Renault Zoe. You need to use the buttons located on the right side of the steering wheel, the menu button and the up & down buttons. Navigate through the menu until you highlight the vehicle at the top, as indicated by the YouTuber, and using the up and down buttons, find the service option. Once found, press and hold the OK button located in the centre of the button panel until the service message starts to flash. When it turns off, everything will be sorted.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Zoe
How to reset the service light on the Renault Zoe
Renault Zoe (2013-2024 / MK 1) Today we will explain how to reset the service light, related to the car service, of the Renault Zoe on your own. To perform the reset of the service…
How to Reset the Service Light on a Renault Zoe
How to Reset the Service Light on a Renault Zoe
Renault Zoe (2013-2024 / MK 1) To reset the Service light on a Renault Zoe, turn the ignition key to switch on the instrument panel. Once the panel is on, navigate through the menu…
How do you reset the Service light on the Renault Zoe?
How do you reset the Service light on the Renault Zoe?
Renault Zoe (2013-2024 / MK 1) It will be possible to completely reset the Service light shown on the instrument panel of the Renault Zoe by turning on the instrument panel, insert…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos