Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the front fog light of the Renault Megane.

Model: Renault Megane Megane 1 - Years 1995-2003
Part: Fog lights

Today we will see the instructions that will allow us to disassemble and replace the front fog light and its bulb of the Renault Megane. First of all, we open the car's hood and start disassembling and removing the front bumper, unscrewing all the fixing screws; then we unscrew the screws of the front fog light, disconnecting the electrical connector of the bulb to remove it, as shown in the video. At this point, we replace the entire front fog light or just the bulb, making the electrical connection and finally reassembling the front bumper!

Posted on 24 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the fog light bulb of the Renault Megane?
How do you replace the fog light bulb of the Renault Megane?
Renault Megane (2008-2015 / Megane 3, Megane III) In order to replace the fog light bulb of the Renault Megane, you need to loosen the screws that secure the inner lining of the wheel arch, so that i…
How to replace the headlight bulb of the Renault Megane
How to replace the headlight bulb of the Renault Megane
Renault Megane (2008-2015 / Megane 3, Megane III) The steps outlined in this guide will show us the procedure for disassembling and replacing the headlight bulb of the Renault Megane. First, we open …
How to change the front bulbs Renault Megane
How to change the front bulbs Renault Megane
Renault Megane (2008-2015 / Megane 3, Megane III) We see the disassembly of the headlight of a Megane and the disassembly of the damaged bulbs inside it. Lift the front hood, unscrew the fastening sc…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos