Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Time on a 2003 Renault Twingo?

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Checks and maintenance

See other generations:
Video tutorial

The need to adjust the time on the Renault Twingo can arise from various factors, such as disconnecting the car battery for replacement or incorrect previous settings. Making this adjustment is very simple, as shown in this video.

After turning on the instrument cluster, use the button located on the right side of the cluster to adjust the hours and minutes. First, set the hours, then keep the button pressed to save this data before moving on to the minutes, using the same procedure.

Once finished, save everything again by holding down the button.


Updated on 29 September 2026 by ScegliAuto


Related tutorials

How to Set the Time on the Renault Twingo 2?
How to Set the Time on the Renault Twingo 2?
Renault Twingo (2014-2024 / Twingo III, Twingo 3) Setting the time on the new Renault Twingo from 2014 onwards is very simple. From the central panel of the car, start by clicking the Setup button be…
How to Set the Time in the Renault Twingo?
How to Set the Time in the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) As shown in this tutorial, setting the time in the Renault Twingo 2 is a very simple and quick operation. Start by turning on the instrument cluster;…
How to Adjust the Time on a Renault Twingo?
How to Adjust the Time on a Renault Twingo?
Renault Twingo (1993-2007 / Twingo 1) In this tutorial, you will see how to adjust the time on a Renault Twingo, a very simple and quick operation to perform, for example, after disconnec…

    Frequently Asked Questions

    • Twingo 1993-2007 - Where is the OBD port on the Renault Twingo located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos