Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the spare wheel of the Renault Clio IV located?

Model: Renault Clio MK 4, Clio 4, Clio IV - Years 2012-2019
Part: Wheel

On all cars, there is a spare wheel or an emergency repair kit in case we find ourselves with a flat tire. On all Renault Clio mk4 models, the spare wheel is located on the outside bottom of the car. To release the wheel from its housing, you will need to: open the trunk, remove the internal cover, turn the white wheel counterclockwise until the wheel comes off its housing and falls to the ground. Finally, you just need to release the metal wire to use it. If you want to reposition the wheel in its housing, you will need to: attach the metal wire to the wheel, pull the lever upwards until you hear a click, and then close the trunk.

Posted on 2 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the spare wheel of the Renault Clio located?
Where is the spare wheel of the Renault Clio located?
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) On board the Renault Clio, the spare wheel is located in the lower part of the trunk, under the car's floor: to remove it from its housing, you will …
How to attach the spare wheel of the Renault Clio
How to attach the spare wheel of the Renault Clio
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) In this short video we will see the procedure necessary to remove and re-attach the spare wheel from its compartment of the Renault Clio. First we op…
How do you release the spare wheel in the Renault Clio?
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) In this video we can see how to release the spare wheel in the Renault Clio, useful in case of a puncture. First we remove the base of the luggage co…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos