Do it yourself
Frequently asked questions about cars and motorcycles

What can the activation of the "engine failure risk" warning on a Renault car be attributed to?

Model: Renault Renault Various
Part: Instrument cluster

In this video we can see the advice of a youtuber regarding the ignition of a worrying warning light that can come on in the instrument panel of a Renault car: "engine malfunction", which can come on together with the "STOP" signal, causing serious stress. The first problem can be traced back to the cooling system or the temperature sensor that is loose or damaged. So let's check that there are no leaks from the tank, examine the connections of the flexible hoses, the radiator, and top up the liquid (even water temporarily is fine) if we find a leak. The second problem is the fuel injector that may not be working properly, causing fuel delivery issues. One solution may be to clean it or replace it. The third problem is definitely the 12 Volt battery, which may be discharged or defective: the solution is only to replace the battery, especially if it is the original one or if it is three or four years old.

Posted on 18 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Renault Various If your Renault's battery discharges unexpectedly or if you have replaced it without connecting the cables to an auxiliary battery on older models, y…
Renault Renault Various In this video we see how to bleed the thermostat of the cooling liquid of a Renault F9Q DCi engine: in the footage we see the return circuit with all…
Renault Renault Various In this tutorial we can see how to reset the R-Link system of a Renault, an extremely simple and quick operation, to be carried out for example as an…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos