|
Do it yourself
| |||
| ||||
How to set the clock on the Renault Master
Model: Renault Master
MK 3
- Years 2010-2023
To change the time on the Renault Master, we only turn on the instrument panel, without starting the engine, turn off the radio, press the button at the bottom right of the windshield wiper control lever until the time appears in the center, hold down the button at the bottom until the hour starts flashing, adjust the hour with the buttons at the right end of the windshield wiper control lever; once the hour is set, wait a few seconds for the minutes to start flashing, adjust them with the buttons at the right end of the same lever, once the minutes are set, wait for them to stop flashing and the time on the instrument panel is set; now we adjust it on the radio: turn on the radio, press the "setup" button, go to the "clock" setting, press the right knob to confirm, then press the right knob again on the "set time" setting, now turn the right knob to adjust the hour, then press it to confirm the hour and move on to the minutes, adjust them with the knob, press it to confirm the minutes and it automatically takes us back to the previous screen and press the button with the left arrow to return to the main screen.
Posted on 28 June 2024 by ScegliAuto
Video tutorial
Related tutorials
Renault Master
(2010-2023 /
MK 3)
Let's see how to adjust the time on the Renault Master III: press the button with the up arrow until the display shows "set". When this appears, do n…
Renault Master
(2010-2023 /
MK 3)
These brief and simple steps will show you how to adjust the clock on the dashboard of the Renault Master, following the instructions below. First, g…
Renault Master
(1997-2010 /
MK 2)
In a few simple steps, we will see how to adjust the time on the central display of the Renault Master dashboard. First, get into the vehicle and tur…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.419
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |