Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the service light on the Renault Trafic

Model: Renault Trafic MK 3 - Years 2014-2026
Part: Service warning light

In this video, we are shown the procedure for resetting the maintenance light on the Renault Trafic. The procedure takes less than 1 minute to complete and no tools or software are needed. To reset it, you need to: start the instrument panel, then press the down arrow button to scroll through the menu until you find the light related to oil change, once you find this light, press and hold the ok button for a few seconds to reset it. At first, the light will start flashing, then it will reset and stop flashing, at this point release the button and restart the panel to verify that the procedure was successful.

Posted on 4 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Renault Trafic?
How to Reset the Service Light on the Renault Trafic?
Renault Trafic (2001-2014 / MK 2) On the Renault Trafic, reset the service light by holding down the accelerator pedal while the ignition is off. With the pedal pressed, insert the ig…
How to reset the Service light on a Renault Trafic?
How to reset the Service light on a Renault Trafic?
Renault Trafic (2001-2014 / MK 2) To reset the Service light on a Renault Trafic, turn on the ignition by inserting the key into the ignition barrel and turning it clockwise. Before t…
How to Reset the Service Light on the 2014 Renault Trafic
How to Reset the Service Light on the 2014 Renault Trafic
Renault Trafic (2001-2014 / MK 2) The procedure required to manually reset the service light on your 2014 Renault Trafic is practically identical to that used in many other Renault mo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos