Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Maintenance Light on the Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

This video shows the procedure to reset the maintenance light on the Renault Clio 4. The procedure takes little time and does not require any specific tools or software. To reset the light, first, start the instrument cluster, then press the up arrow button located on the side of the wiper lever to scroll through the menu until you reach the maintenance option.

At this point, restart the cluster, scroll again through the menu until you find the service interval option, once located, press and hold the button for about 15 seconds; the light will start flashing and then reset to show 20,000 km/13 months. At this point, the reset will be complete.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In the following article, we will show you how to restore the maintenance message of the Renault Clio 4th series. To do this, you need to reset the m…
Renault Clio (2019-2026 / Clio V, Clio 5) In this article, you will learn how to reset the tyre warning light on the Renault Clio 5. The procedure is simple and takes less than 1 minute to co…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video, we will see how to reset the service light on a Renault Clio IV. It is very important to remember not to reset the indicator if the se…

    Frequently Asked Questions

    • Clio 2005-2013 - What does the flashing engine light on a Renault Clio III mean? Read answer
    • Clio 2005-2013 - What does the electrical fault warning light mean in the Renault Clio? Read answer
    • Clio 2012-2019 - What is the authentication code in a Clio and where is it located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos