Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the brake light bulbs of a Renault Twingo

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Light bulb

In this video we can see how to change the bulb of one of the side stop lights of the Renault Twingo. As the YouTuber says, it's not difficult at all: from the rear trunk we remove the washer from the headlight housing, and this comes off easily. We find three bulbs underneath. The stop light bulb is the one at the top. To remove it, simply press lightly and rotate counterclockwise a quarter turn. We put a new one in its place - if we don't have it in the bulb replacement kit, we can easily find it at gas stations, it's an H7 bulb - then we just have to put the headlight housing back in place and screw the washer back on from the inside. Job done.

Posted on 14 July 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the rear light on Twingo
Replacing the rear light on Twingo
Renault Twingo (1993-2007 / Twingo 1) How to remove the rear light of the Twingo? We lift the luggage compartment cover hatch and identify where to disassemble. We unscrew the tightening …
How to replace the front headlights bulbs in the Renault Twingo?
How to replace the front headlights bulbs in the Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this tutorial, we can see how to replace the front headlight bulbs in the Renault Twingo, a very simple and quick operation. First of all, make su…
How to replace headlight bulbs on Renault Twingo
How to replace headlight bulbs on Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) How to replace headlight bulbs on Renault Twingo? We open the front hood by pulling the lever located at the bottom left of the dashboard, let's put …

Other guides you may be interested in

How to Remove the Instrument Cluster on a Nissan Qashqai

How to remove the instrument cluster on a Nissan Qashqai? Follow these steps: use a lever to remove the trim plastics under the steering wheel and take out the air vent next to the instrument cluster. Unscrew the securing screws of the instrument cluster with a screwdriver; after removing the plastics, pull out the ignition button (right side) from the dashboard and detach the plastics in the centre of the cluster. Unscrew the securing screws around the instrument cluster and remove it along with the power cable located at the back of the cluster. Install a new part or replace the LEDs/bulbs in the cluster and reassemble it.

Watch the video!


by ScegliAuto

More videos