|
Do it yourself
| |||
| ||||
How to manage low tire pressure or a flat tire
Model: Renault Clio
Clio V, Clio 5
- Years 2019-2026
In this video we listen to some sensible advice, aimed at Renault Clio owners but certainly valid for any type of vehicle. First of all, if we pick up a nail or something sharp, do not remove it from the tire, as it will definitely deflate. Instead, go to the nearest tire shop. Do not attempt to drive with the tire flat as it will only damage the rim and make the tire unusable. If the hole is small and on the tread, we can try to repair it with the inflation kit, consisting of the compressor and the container full of sealant. The first thing to do is to position the wheels so that the hole is at the bottom. Then, screw the sealant to the compressor and connect the compressor to the tire valve, and the compressor to the 12 Volt outlet. During the inflation operation, the engine must remain on to avoid draining the battery. When the gauge reaches the required pressure, disconnect the compressor and close the valve. The information regarding the pressure to adjust the tire to can be found in the driver's door thickness. Drive for 4/5 kilometers at no more than 80 km/h and recheck the tire pressure. This is only to get you to the nearest tire shop. You can drive a maximum of 200 kilometers with the tire repaired in this way.
Posted on 14 July 2024 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(2012-2019 /
Clio IV, MK 4, Clio 4)
If the low tyre pressure warning light has illuminated on the dashboard, you must first check for a puncture. If there is no puncture, restore the re…
Renault Clio
(2012-2019 /
Clio IV, MK 4, Clio 4)
When the low tyre pressure warning light illuminates on the dashboard, check the actual tyre inflation pressure and restore it to the values specifie…
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
In the video and description provided, you can find instructions on how to handle a punctured tyre. If the vehicle has an inflation kit available, re…
Other guides you may be interested in
|
How to Remove the Headrests from the Fiat Panda
In this guide, discover the main steps to disassemble and remove the headrests, both front and rear, from the Fiat Panda, as well as other models from the manufacturer. First, get in the vehicle and press the buttons located at the base of the headrest posts; while holding them down, pull the headrests upwards to remove them, as shown in the video. At this point, reinstall the headrest by lowering it until it clicks and adjust it to the desired height! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.101
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |