Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Renault Clio?

Model: Renault Clio Clio V, Clio 5 - Years 2019-2026
Part:

On the instrument panel of the Renault Clio, it will be possible to completely make the tire pressure warning light disappear by turning on the instrument panel, to check from the menu on the display which wheel needs to be inflated. Once this wheel has been inflated to the optimal inflation pressure, you will need to proceed in the menu with the directional arrows until you find the icon for low tire pressure. By holding down the OK button on the right side of the steering wheel, you can verify that the warning light will start flashing, until it turns off completely; at that point, you can release the button and remove the key.

Posted on 24 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light (TPMS) of the Renault Clio
How to reset the tire pressure warning light (TPMS) of the Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Today we will see how to reset the tire pressure warning light (TPMS) of the Renault Clio; before performing the reset, it is necessary that all four…
How to reset the tire pressure warning light on the Renault Clio
How to reset the tire pressure warning light on the Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) The ignition of the tire pressure warning light signals an anomaly in the pressures on one or more tires; before resetting the light on the Renault C…
How to reset the tire pressure warning light on the Clio 5
How to reset the tire pressure warning light on the Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) In the following article, we will see how to reset the tire pressure warning light on the Renault Clio 5. This procedure is useful after adjusting th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos