Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Renault Trafic key remote control

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Key

Following these brief and simple instructions, we will see how to disassemble and replace the battery of the Renault Trafic key remote control. First, take our key and start levering on the side of the remote control, opening the shells in two parts; in this way, it will be possible to access the electronic board and the battery, as shown in the video. Now, remove and replace the battery with the new one, of the correct type (in this case a CR 1220 3V); insert it in the correct direction and reassemble the remote control, fixing the two shells!

Posted on 16 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery in the Renault Trafic remote control?
How to replace the battery in the Renault Trafic remote control?
Renault Trafic (2001-2014 / MK 2) To replace the battery of the Renault Trafic remote control, you need to unscrew the screw located in the corner of the device, so that the two plast…
Replace the remote control battery on Renault Trafic
Replace the remote control battery on Renault Trafic
Renault Trafic (2001-2014 / MK 2) If the central locking of your Renault Trafic stops working, it will probably cause interference or, more simply, the dead battery inside the remote …
Replacing Key Battery on Renault Trafic
Replacing Key Battery on Renault Trafic
Renault Trafic (2001-2014 / MK 2) Is the Renault key battery flat? Here’s how to change the battery on a Trafic key. Take your remote key and, using a screwdriver, pry between the two…

Other guides you may be interested in

How to Remove the Front Headlamp of a Renault Clio

Remove the front headlamp of a Renault Clio. Open the bonnet by pulling the release lever and secure it; using a battery-powered screwdriver or a screwdriver, undo the securing bolts located at the top of the bumper. Once the screws at the top are undone, remove the splash guard bolts and finally remove the bolts at the bottom of the bumper. Carefully detach the bumper from the body of the vehicle. At this point, disconnect the headlamps from the body (undo the securing bolts) and the bulb holder from the headlamp. Fit the new headlamp with new bulbs if damaged (always ensure the correct type and size) and insert the headlamp into its housing. Finally, refit the front bumper and tighten the bolts.

Watch the video!


by ScegliAuto

More videos