Do it yourself
Frequently asked questions about cars and motorcycles

How to change the diesel filter on a Renault Kangoo II

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Diesel fuel filter

In this video we can see how to change the diesel filter on a Renault Kangoo II: we open the hood, and the filter is located on the left side, right next to the outer side of the bodywork. We surround it with a good amount of paper that can absorb the diesel that comes out when we remove it from its seat. We disconnect the tubes using a flathead screwdriver, then remove the filter fixing nut, and remove the filter, which we will put in a basin for liquid recovery. Now we take the new filter, remove the cap and put it back in the ring in its place, tighten the screw and reattach the diesel tubes, and pump the priming pump until it becomes hard. Operation completed.

Posted on 23 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Kangoo (2007-2021 / MK 2, FC, FW) In this video, you will learn how to replace the fuel filter in a Renault Kangoo 2. First, open the bonnet of the engine compartment and, as shown in…
Renault Kangoo (1997-2008 / MK 1, KC, KW) How to replace the fuel filter on a Renault Kangoo? Follow this guide: open the car's door and pull up the engine compartment release lever located a…
Renault Kangoo (2007-2021 / MK 2, FC, FW) How to change the pollen filter on a Renault Kangoo or Express. On the passenger side, at the bottom, there is a panel held in place by clips. Under …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos