Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights in the Renault Kangoo van?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Tail light

In this tutorial we can see how to replace the rear lights in the Renault Kangoo van, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the rear door, locate the screws along the inner edge of the headlight in question and unscrew them using a Torx T20 key. Then close the rear door, grab the headlight and separate it from the bodywork. At this point, all that remains is to disconnect the power connector, transfer the bulbs to the replacement, if necessary, and follow the reverse procedure.

Posted on 24 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulbs in a Renault Kangoo?
How to Replace the Rear Light Bulbs in a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) In this tutorial, you will learn how to remove the rear lights in a Renault Kangoo and replace the bulbs, a very simple and quick operation. First, e…
Safety Test on Commercial Vans: Renault Kangoo Van 2025
Safety Test on Commercial Vans: Renault Kangoo Van 2025
Renault Kangoo (2020-2026 / KFK, MK 3, FFK) Euro NCAP tested the Renault Kangoo Van in 2025, achieving an overall score of 4 stars out of 5. The lane keeping test was deemed effective; the syst…
How to Reset the Service on a Renault Kangoo Stepway Van?
How to Reset the Service on a Renault Kangoo Stepway Van?
Renault Kangoo (2020-2026 / KFK, MK 3, FFK) In this tutorial, see how to reset the service on a Renault Kangoo Stepway van, a very simple and quick operation to perform only after completing al…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos