|
Do it yourself
| |||
| ||||
How to replace the wheel with the spare one on the Renault Kangoo
Model: Renault Kangoo
FFK, KFK, MK 3
- Years 2020-2026
Today we will discover the instructions that will allow us to disassemble and replace the wheel with the spare one of the Renault Kangoo, in simple steps. First, we open the rear doors of the vehicle and start extracting the key and the jack to lift the vehicle; we use the key to unscrew the screw of the spare wheel, lowering it from the platform, as shown in the video. At this point, we lift the vehicle and unscrew the wheel bolts, removing it and replacing it with the spare one; we fix it correctly by screwing the bolts in a crossed manner, following the video tutorial until the end!
Posted on 30 July 2024 by ScegliAuto
Video tutorial
Related tutorials
Renault Kangoo
(2020-2026 /
FFK, KFK, MK 3)
In this video we see where to find the spare wheel of the Renault Kangoo E-Tech: we can actually find it in the trunk. Just above the right rear whee…
Renault Kangoo
(2020-2026 /
FFK, KFK, MK 3)
In this tutorial we can see how to remove the spare wheel in the Renault Kangoo, an extremely simple and fast operation, to be carried out, for examp…
Renault Kangoo
(2007-2021 /
FW, FC, MK 2)
It will be possible to replace the rear shock absorber of the Renault Kangoo by lifting the vehicle using a jack: then you can loosen the screws that…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.105
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
