|
Do it yourself
| |||
| ||||
How to repair the airbag warning light on
Model: Renault Clio
Clio IV, MK 4, Clio 4
- Years 2012-2019
When we start the car, the airbag light comes on for a few seconds and then turns off: it is the check that our car does every time it is turned on. But if it remains on, it means there is a problem, and very often it is the yellow wiring located under the driver's seat (or passenger's seat). Before working on this component, it is good practice to disconnect the negative pole of the 12 Volt battery. The video shows both the yellow wiring and the connector of the same color: these components tend to have problems due to the movement of the seat forward or backward; also hitting the connector with a vacuum cleaner when cleaning can cause problems. The same can happen when driving on very bumpy roads. Therefore, we check the perfect connection of the connector, and that the yellow cable has not been damaged.
Posted on 3 August 2024 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(1998-2005 /
Clio 2, MK 2)
The airbag light issue on the Clio II is shown in the video, citing two error codes: F071, which indicates a circuit interruption in the passenger si…
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
In this video, you will see the steps to remove the driver's airbag and steering wheel following the "airbag fault" warning displayed. The first step…
Renault Clio
(1998-2005 /
Clio 2, MK 2)
Removing the airbag located inside the steering wheel of the 2003 Renault Clio model is a simple and quick operation to perform independently. To rem…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Repair the Key Spring of the Peugeot 207?
Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.121
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |