Do it yourself
| ||||
|
Renault Clio - Video tutorial
Model: Renault Clio
MK 3, Clio 3, Clio III
- Years 2005-2013 In this video we witness the removal of the driving airbag and the steering wheel following the "airbag failure" warning that appeared on the information display. The first step is to disconnect the battery and wait about a minute before starting work. Now we can actually get started. Let's unscrew the three screws in the lower part of the steering wheel (it is advisable to rotate the steering wheel to work more easily). With the help of a screwdriver we go to force the space between the steering wheel and the airbag cover to remove the latter. Once this is done we can remove the airbag by disconnecting the two side connectors and the rear one. Thus the airbag is removed! By removing the central screw, it is also possible to remove the steering wheel from its seat.
Posted on 19 March 2024 by ScegliAuto
Disassembly of the airbag on Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Does the Renault Clio airbag have malfunctions? We see the disassembly of the airbag from above the steering wheel. Simple operation. We disconnect t
Steering disassembly on Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Let's see the disassembly of the steering wheel of a Renault Clio. Before disassembling the car steering and the airbag, disconnect the cables from t
How to remove the steering wheel airbag on Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Let's see how to remove the steering wheel airbag on Renault Clio. Before disassembling the car steering wheel, we disconnect the car power supply te Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |