Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace a fuse on the Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Fuse box

Following these brief and simple steps, we will see how to remove and replace a blown fuse with a new one in the Renault Clio. First, open the front door on the driver's side and begin by removing the plastic cover located on the side of the dashboard to access the internal fuse box; then use the plastic tweezers (if provided) or use a thin pair of pliers with pointed tips to remove the blown fuse, as shown in the video. At this point, install the new fuse, with the same amperage as the previous one!

Posted on 7 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuse of the engine fan of the Renault Clio
How to replace the fuse of the engine fan of the Renault Clio
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) Today we will explain how to replace the fuse of the engine fan of the Renault Clio model 4. To replace the fuse, we need to open the front hood and …
How to replace the windshield wiper fuse of the Renault Clio
How to replace the windshield wiper fuse of the Renault Clio
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) The front windshield wiper fuse of the Renault Clio model IV is located inside the fuse box inside the cabin; specifically, the box is located under …
How to replace the car radio fuse of a Renault Clio
How to replace the car radio fuse of a Renault Clio
Renault Clio (2005-2013 / Clio 3, Clio III, MK 3) Before we can start, we will have to go and sit in the driver's seat of our Renault Clio. So let's start by disengaging and removing the cover of the…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2005-2013 - Where is the Renault Clio windshield washer pump fuse located? Read answer

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos