Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Service warning light

To reset the service light on the Renault Clio 4 Captur, the first step is to insert the card, as shown in the video, into the designated slot of the onboard computer. Using the appropriate button, press it multiple times until the display on the dashboard shows "Service Due". Hold the button down for about five seconds until the message "Maintenance in X km/00 months" appears. Keep the button pressed for another five seconds or so, and the message will update to indicate the new limit for the next service. This procedure is also valid for resetting the oil change reminder.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Captur.
How to reset the service light on the Renault Captur.
Renault Captur (2013-2019 / MK 1) Today we will see how to independently carry out the procedure to reset the service light in case it lights up, as well as the maintenance procedure …
How to Reset the Service Light on a Renault Captur?
How to Reset the Service Light on a Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the Service light on a Renault Captur, turn on the instrument panel to navigate through the menu: press the button located at the bottom of …
How to Reset the Service Light of the Renault Captur?
How to Reset the Service Light of the Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the Service light of the Renault Captur, turn on the instrument panel and then press the button located at the bottom of the end of the leve…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos