Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Saab 9 3

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Door trim panel

Remove the door panel (rear right) on a Saab 9 3: disconnect the battery terminals located in the engine bay, remove the plastic covers from the handle, and use a screwdriver to unscrew the screws inside the handle. Remove the trim plastic near the lock, unscrew the remaining screws on the door panel, and detach the retaining clips. Finally, pull the panel away with your hands and disconnect it from the door (unplug the power wiring and the opening cable). Perform the desired maintenance inside the door.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Saab 9-3
How to Remove the Door Panel on a Saab 9-3
Saab 9 3 (2002-2014 / MK 2) Start by disconnecting the battery terminals in the engine bay. Use a screwdriver to unscrew the screws located in the handle area (after removing th…
Replace Antenna on Saab 9-3
Replace Antenna on Saab 9-3
Saab 9 3 (2002-2014 / MK 2) Replace the non-functioning antenna on a Saab 9-3. Use a screwdriver to pry between the securing clips and the headlining (without damaging the headl…
How do you replace the external rearview mirror of the Saab 9-3?
How do you replace the external rearview mirror of the Saab 9-3?
Saab 9 3 (2002-2014 / MK 2) To replace the external rearview mirror of the Saab 9-3, you need to loosen the screws that secure the triangular cover located on the inside of the …

Other guides you may be interested in

Fuse Replacement on Fiat Grande Punto

Fuse replacement on the Fiat Grande Punto? Let's see where they are located. Open the door and enter the cabin, then open the glove compartment in the front dashboard (you will find the fuses there). You will also find fuses in the engine compartment: open the front bonnet and remove the cover near the battery using a plastic lever. Use pliers to disconnect the damaged fuses located in the compartment. Once this is done, insert the new fuses into the designated slots in the compartment. Close the fuse inspection box with the cover.

Watch the video!


by ScegliAuto

More videos