Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Saab 9-3

Model: Saab 9 3 MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

Start by disconnecting the battery terminals in the engine bay. Use a screwdriver to unscrew the screws located in the handle area (after removing the plastic cover). Remove the trim near the lock, unscrew the remaining screws on the door panel, and detach the retaining clips.

Finally, pull off the panel by hand and detach it from the door (disconnect the power wiring and the opening cable). Carry out the desired maintenance inside the door and reassemble everything.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

Removing the Door Panel on a Saab 9 3
Removing the Door Panel on a Saab 9 3
Saab 9 3 (2002-2014 / MK 2) Remove the door panel (rear right) on a Saab 9 3: disconnect the battery terminals located in the engine bay, remove the plastic covers from the hand…
How to Remove the Radio from a SAAB 9-3
How to Remove the Radio from a SAAB 9-3
Saab 9 3 (2002-2014 / MK 2) Before you can begin, sit in the driver's seat of your SAAB 9-3. Start by unclipping and removing the air vents located above the radio using a flath…
How to Remove the Gear Knob from a Saab 9-3
How to Remove the Gear Knob from a Saab 9-3
Saab 9 3 (2002-2014 / MK 2) Before starting, sit in the driver's seat of your Saab 9-3. Using a flathead screwdriver and leveraging, begin by unclipping and removing the upper c…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos