Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 3
    4. : Door trim panel

Saab 9 3 - Door trim panel

Door Trim Panel Saab 9 3 (2002-2014 / mk 2)

Saab 9 3 (2002-2014 / MK 2)
How to Remove the Door Panel on a Saab 9-3
Start by disconnecting the battery terminals in the engine bay. Use a screwdriver to unscrew the screws located in the handle area (after removing the plastic …Read all…
Posted on 24 March 2026 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Removing the Door Panel on a Saab 9 3
Remove the door panel (rear right) on a Saab 9 3: disconnect the battery terminals located in the engine bay, remove the plastic covers from the handle, and …Read all…
Posted on 23 March 2026 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Removing the Front Door Panel
It is advisable to disconnect the battery before proceeding with the removal. First, detach the handle cover to access the screws underneath; use a spatula to …Read all…
Posted on 9 February 2026 by ScegliAuto
Airbag (1) Shocks (1) Antenna (2) Car stereo (6) Battery (1) Transmission (1) Spark plugs (5) Body (2) Key (4) Timing belt (2) Onboard computer (1) Checks and maintenance (1) Dashboard (2) Brake rotors (2) Rear bench seat (1) Headlight (3) Air filter (4) Cabin air filter (8) Fuel filter (1) Fuel injectors (1) Accessory kit (6) Light bulb (1) Headlight bulb (6) Tail light bulb (2) Handle (1) Power window motor (1) Starter motor (2) Engine oil (2) Clock (1) Door trim panel (3) Front bumper (2) Brake pads (1) Shift knob (3) Car door (1) Instrument cluster (2) Fuse box (2) Seat (4) Suspension system (1) Side mirror (7) Rearview mirror (1) Warning light – error code (6) Service warning light (10) Windshield wipers (1) Cylinder head (1) Tie rods (1) EGR valve (3) Blower motor (1) Steering wheel (3)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos