Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Saab
  4. :
  5. 9 3
  6. : Steering wheel

Saab 9 3 - Steering wheel

Saab 9 3 (2002-2014 / MK 2)
Removal of the Saab 9-3 steering wheel

In this video tutorial we will see how to remove the steering wheel of a Saab 9-3. First we get inside the car and unscrew the screws that we find on the back …read all…
Posted on 2 February 2024 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
CIM module disassembly instructions

In order to remove the light switch unit or CIM module (Chassis Integration Module) it is necessary to remove the steering wheel. It is therefore necessary to …read all…
Posted on 21 July 2023 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Steering wheel and CIM module disassembly instructions

The first operation to carry out is to adjust the steering wheel all the way down and out to facilitate disassembly operations. Then release the airbag …read all…
Posted on 12 July 2023 by ScegliAuto

Airbags (1) Shock absorbers (1) Antenna (2) Car stereo (7) Battery (1) Gearbox (1) Spark plugs (5) Bodywork (1) Key (3) Timing belt (2) -board computer (2) Checks and maintenance (5) Throttle body (1) Dashboard (2) Brake discs (2) Rear bench seat (1) Headlight (3) Air filter (4) Cabin air filter (7) Petrol filter (1) Injectors (1) Accessory Kit (6) Light bulb (1) Headlight bulb (5) Rear light bulb (2) Handle (1) Window motor (1) Starter motor (2) Engine oil (2) Door panel (3) Front bumper (2) Brake pads (1) Gear Shift Knob (2) Door (1) Instrument cluster (2) Seat (4) Suspensions (1) Outside rearview mirror (7) Interior rearview mirror (1) Windscreen wipers (1) Engine head (1) Steering rods (1) EGR valve (3) Interior blower (1) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos