Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 3
    4. : Spark plugs

Saab 9 3 - Spark plugs

Spark Plugs Saab 9 3 (2002-2014 / mk 2)

Saab 9 3 (2002-2014 / MK 2)
How to Replace the Spark Plugs on a Saab 9-3?
To replace the spark plugs on a Saab 9-3, open the bonnet and remove the plastic cover from the top of the engine. Use a T30 Torx screwdriver to loosen the …Read all…
Posted on 7 June 2026 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
How to Replace the Spark Plugs on a Saab 9-3
Release the bonnet from the appropriate lever and lift it. Now you will need access to the area beneath the upper engine cover, so remove it by unscrewing the …Read all…
Posted on 8 March 2026 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Replacing Engine Spark Plugs
Disconnect the ECU connector. Carefully lift the plastic cover protecting the engine upwards. To avoid mixing up the cables, disconnect only the first spark …Read all…
Posted on 12 February 2026 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Replacing Engine Spark Plugs
Disconnect the ECU connector. Carefully remove the plastic cover protecting the engine. To avoid mixing up the cables, disconnect only the first spark plug. …Read all…
Posted on 12 February 2026 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Instructions for Replacing Spark Plugs
After opening the front engine bonnet, ensure it remains securely open. It is advisable to carry out this operation with the engine cold to avoid unpleasant …Read all…
Posted on 7 February 2026 by ScegliAuto
Airbag (1) Shocks (1) Antenna (2) Car stereo (6) Battery (1) Transmission (1) Spark plugs (5) Body (2) Key (4) Timing belt (2) Onboard computer (1) Checks and maintenance (1) Dashboard (2) Brake rotors (2) Rear bench seat (1) Headlight (3) Air filter (4) Cabin air filter (8) Fuel filter (1) Fuel injectors (1) Accessory kit (6) Light bulb (1) Headlight bulb (6) Tail light bulb (2) Handle (1) Power window motor (1) Starter motor (2) Engine oil (2) Clock (1) Door trim panel (3) Front bumper (2) Brake pads (1) Shift knob (3) Car door (1) Instrument cluster (2) Fuse box (2) Seat (4) Suspension system (1) Side mirror (7) Rearview mirror (1) Warning light – error code (6) Service warning light (10) Windshield wipers (1) Cylinder head (1) Tie rods (1) EGR valve (3) Blower motor (1) Steering wheel (3)

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos