Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Saab
  4. :
  5. 9 3
  6. : Outside rearview mirror

Saab 9 3 - Outside rearview mirror

Saab 9 3 (2002-2014 / MK 2)
How do you replace the external rearview mirror of the Saab 9-3?

To replace the external rearview mirror of the Saab 9-3, you need to loosen the screws that secure the triangular cover located on the inside of the door. Once …read all…
Posted on 7 July 2023 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Glass replacement on Saab 9-3 mirror

Rotate the mirror hood so that the outside is facing the hood, then rotate the mirror glass in the same direction using the electronic controls inside the …read all…
Posted on 20 January 2024 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Replace mirror on Saab 0 3

Replacing the mirror of a Saab 9 3, let's see how it changes. With a plastic lever, we go to pry between the perimeter of the mirror frame and the mirror glass …read all…
Posted on 2 December 2023 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
How to replace the exterior mirror mirror on Saab 9 3

Let's see how to replace the mirror of the exterior mirror on Saab 9 3. With a lever with a plastic or rubber coating, we go to pry between the perimeter of …read all…
Posted on 11 November 2023 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
How to replace the exterior mirror on Saab 93

We see in this video how to proceed with the disassembly of the external rearview mirror on Saab 93. With a lever with plastic or rubber, we go to pry between …read all…
Posted on 15 October 2023 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Replacement outside rearview mirror

Replacing just the mirror of the external rear-view mirror is an extremely simple operation since it is simply stuck inside the shell: then unhook the old …read all…
Posted on 20 July 2023 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Replacement exterior rearview mirror

Replacing the exterior rear-view mirror involves removing the door panel. Start by disconnecting the power supply by disconnecting the negative pole of the …read all…
Posted on 2 July 2023 by ScegliAuto

Airbags (1) Shock absorbers (1) Antenna (2) Car stereo (7) Battery (1) Gearbox (1) Spark plugs (5) Bodywork (1) Key (3) Timing belt (2) -board computer (2) Checks and maintenance (5) Throttle body (1) Dashboard (2) Brake discs (2) Rear bench seat (1) Headlight (3) Air filter (4) Cabin air filter (7) Petrol filter (1) Injectors (1) Accessory Kit (6) Light bulb (1) Headlight bulb (5) Rear light bulb (2) Handle (1) Window motor (1) Starter motor (2) Engine oil (2) Door panel (3) Front bumper (2) Brake pads (1) Gear Shift Knob (2) Door (1) Instrument cluster (2) Seat (4) Suspensions (1) Outside rearview mirror (7) Interior rearview mirror (1) Windscreen wipers (1) Engine head (1) Steering rods (1) EGR valve (3) Interior blower (1) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos