Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 3
    4. : Tail light bulb

Saab 9 3 - Tail light bulb

Tail Light Bulb Saab 9 3 (2002-2014 / mk 2)

Saab 9 3 (2002-2014 / MK 2)
Replacement of Rear Light Bulb
To replace the bulb of the rear lights, open the compartment behind the lamp and remove the soundproof cover. After removing the cover, take out the bulb …Read all…
Posted on 12 February 2026 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Replacing the Rear Headlamp Bulb
Open the rear bonnet and unclip the side trim panel to access the bulbs of the rear light. Then unclip the bulb holder (without removing the light unit) and …Read all…
Posted on 6 February 2026 by ScegliAuto
Airbag (1) Shocks (1) Antenna (2) Car stereo (6) Battery (1) Transmission (1) Spark plugs (5) Body (2) Key (4) Timing belt (2) Onboard computer (1) Checks and maintenance (1) Dashboard (2) Brake rotors (2) Rear bench seat (1) Headlight (3) Air filter (4) Cabin air filter (8) Fuel filter (1) Fuel injectors (1) Accessory kit (6) Light bulb (1) Headlight bulb (6) Tail light bulb (2) Handle (1) Power window motor (1) Starter motor (2) Engine oil (2) Clock (1) Door trim panel (3) Front bumper (2) Brake pads (1) Shift knob (3) Car door (1) Instrument cluster (2) Fuse box (2) Seat (4) Suspension system (1) Side mirror (7) Rearview mirror (1) Warning light – error code (6) Service warning light (9) Windshield wipers (1) Cylinder head (1) Tie rods (1) EGR valve (3) Blower motor (1) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos