Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 3
    4. : Brake discs

Saab 9 3 - Brake discs

Saab 9 3 (2002-2014 / MK 2)
Brake pads and discs replacement
Loosen the fixing pins of the front wheels before lifting the car and complete the disassembly after having raised it. Then remove the fixing pins of the brake …read all…
Posted on 23 July 2023 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Replacement brake discs and rear brake pads
Raise the car on a lift or with a jack (in the latter case apply car stands for safety). Remove the wheel and the brake caliper from its support and the …read all…
Posted on 3 July 2023 by ScegliAuto
Airbags (1) Shock absorbers (1) Antenna (2) Car stereo (7) Battery (1) Gearbox (1) Spark plugs (5) Bodywork (1) Key (3) Timing belt (2) -board computer (2) Checks and maintenance (5) Throttle body (1) Dashboard (2) Brake discs (2) Rear bench seat (1) Headlight (3) Air filter (4) Cabin air filter (7) Petrol filter (1) Injectors (1) Accessory Kit (6) Light bulb (1) Headlight bulb (5) Rear light bulb (2) Handle (1) Window motor (1) Starter motor (2) Engine oil (2) Door panel (3) Front bumper (2) Brake pads (1) Gear Shift Knob (2) Door (1) Instrument cluster (2) Seat (4) Suspensions (1) Outside rearview mirror (7) Interior rearview mirror (1) Windscreen wipers (1) Engine head (1) Steering rods (1) EGR valve (3) Interior blower (1) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos