Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 3
    4. : Timing belt

Saab 9 3 - Timing belt

Timing Belt Saab 9 3 (2002-2014 / mk 2)

Saab 9 3 (2002-2014 / MK 2)
How to replace the timing belt on a Saab 9-3?
To replace the timing belt on a Saab 9-3, open the bonnet to access the engine compartment. Remove the hose located to the left of the engine block to gain …Read all…
Posted on 22 August 2026 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Replacing the Timing Belt on a Saab 9-3
Has the timing belt on your Saab 9-3 reached its mileage limit and needs replacing? Let's go through the removal process. Open and lift the front engine …Read all…
Posted on 11 April 2026 by ScegliAuto
Airbag (1) Shocks (1) Antenna (2) Car stereo (6) Battery (1) Transmission (1) Spark plugs (5) Body (2) Key (4) Timing belt (2) Onboard computer (1) Checks and maintenance (1) Dashboard (2) Brake rotors (2) Rear bench seat (1) Headlight (3) Air filter (4) Cabin air filter (8) Fuel filter (1) Fuel injectors (1) Accessory kit (6) Light bulb (1) Headlight bulb (6) Tail light bulb (2) Handle (1) Power window motor (1) Starter motor (2) Engine oil (2) Clock (1) Door trim panel (3) Front bumper (2) Brake pads (1) Shift knob (3) Car door (1) Instrument cluster (2) Fuse box (2) Seat (4) Suspension system (1) Side mirror (7) Rearview mirror (1) Warning light – error code (6) Service warning light (9) Windshield wipers (1) Cylinder head (1) Tie rods (1) EGR valve (3) Blower motor (1) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos