Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 3
    4. : Checks and maintenance

Saab 9 3 - Checks and maintenance

Saab 9 3 (2002-2014 / MK 2)
How do you reset the Service light on a Saab 9-3?
The procedure for resetting the Service light on the Saab 9-3 is done by turning on the instrument panel and turning the appropriate key within its ignition …read all…
Posted on 27 June 2023 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
How do you reset the Service light on a Saab 9-3?
To reset the Service light on the Saab 9-3, you need to turn on the instrument panel by turning the key in its ignition block. Once the panel is on, you can …read all…
Posted on 22 April 2023 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
How to reset the oil service in the Saab 93?
After carrying out the service with oil change in the Saab 9-3, the warning light and the relevant kilometer counter must be reset manually. To do this, it is …read all…
Posted on 13 March 2024 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
How to bind the key on Saab 9-3
In this video tutorial we will see how to associate the key on the Saab 9-3, in case you have replaced it with a new one. In the initial stages of the video we …read all…
Posted on 13 January 2024 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
How to reset the service of a Saab 9 3
Let's see how to reset the service of a Saab 9 3. We turn on the instrument panel of our car with the special remote control key, turn on the car's multimedia …read all…
Posted on 23 November 2023 by ScegliAuto
Airbags (1) Shock absorbers (1) Antenna (2) Car stereo (7) Battery (1) Gearbox (1) Spark plugs (5) Bodywork (1) Key (3) Timing belt (2) -board computer (2) Checks and maintenance (5) Throttle body (1) Dashboard (2) Brake discs (2) Rear bench seat (1) Headlight (3) Air filter (4) Cabin air filter (7) Petrol filter (1) Injectors (1) Accessory Kit (6) Light bulb (1) Headlight bulb (5) Rear light bulb (2) Handle (1) Window motor (1) Starter motor (2) Engine oil (2) Door panel (3) Front bumper (2) Brake pads (1) Gear Shift Knob (2) Door (1) Instrument cluster (2) Seat (4) Suspensions (1) Outside rearview mirror (7) Interior rearview mirror (1) Windscreen wipers (1) Engine head (1) Steering rods (1) EGR valve (3) Interior blower (1) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos