Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 3
    4. : Headlight bulb

Saab 9 3 - Headlight bulb

Headlight Bulb Saab 9 3 (2002-2014 / mk 2)

Saab 9 3 (2002-2014 / MK 2)
How to replace the headlight bulb of the Saab 9-3.
Following these brief and simple steps, we will see how to disassemble and replace the headlight bulb of the Saab 9-3. First, let's open the car's hood and …Read all…
Posted on 9 December 2025 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Replacement of Front Headlamp Bulb
Obtain the appropriate bulbs, remove the rubber cover, then the retaining spring of the bulb holder, and the metal cover. Take out the spring and the bulb from …Read all…
Posted on 12 February 2026 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Replacing the Front Headlight Bulb
To easily access the rear of the headlight, first remove the plastic cover of the battery, the windscreen washer reservoir (simply pull it upwards), and the …Read all…
Posted on 8 February 2026 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Front Headlight Bulb Replacement
To replace the front headlight bulb, you must remove the headlight itself: open the front bonnet and ensure it is securely supported, remove the plastic cover …Read all…
Posted on 7 February 2026 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
Replacement of Front Headlight Bulb
In this guide, to describe the operations more clearly, the headlight was completely removed from the vehicle and placed on the workbench. Once the headlight …Read all…
Posted on 5 February 2026 by ScegliAuto
Saab 9 3 (2002-2014 / MK 2)
How to Replace the Front Headlight Bulb
Need to replace the front headlight bulb? This guide indicates how to do it, knowing the type of fitting. Open the bonnet and you will see the two upper …Read all…
Posted on 5 February 2026 by ScegliAuto
Airbag (1) Shocks (1) Antenna (2) Car stereo (6) Battery (1) Transmission (1) Spark plugs (5) Body (2) Key (4) Timing belt (2) Onboard computer (1) Checks and maintenance (1) Dashboard (2) Brake rotors (2) Rear bench seat (1) Headlight (3) Air filter (4) Cabin air filter (8) Fuel filter (1) Fuel injectors (1) Accessory kit (6) Light bulb (1) Headlight bulb (6) Tail light bulb (2) Handle (1) Power window motor (1) Starter motor (2) Engine oil (2) Clock (1) Door trim panel (3) Front bumper (2) Brake pads (1) Shift knob (3) Car door (1) Instrument cluster (2) Fuse box (2) Seat (4) Suspension system (1) Side mirror (7) Rearview mirror (1) Warning light – error code (6) Service warning light (9) Windshield wipers (1) Cylinder head (1) Tie rods (1) EGR valve (3) Blower motor (1) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos