Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the engine fuse box located in the 2009 Saab 9-7X?

Model: Saab 9 7x MK 1 - Years: 2005, 2006, 2007, 2008, 2009
Part: Fuse box

Video tutorial

If you are experiencing operational issues with one or more electrical components of your 2009 Saab 9-7X and you want to access the engine fuses, all you need to do is follow the procedure described in the following guide. First, make sure to completely turn off the vehicle, then proceed to lift the front hood.

Once that is done, place the safety support and then locate the fuse box, which is on the right side of the engine compartment. Finally, remove the protective cover, and you’re done.


Posted on 7 January 2026 by ScegliAuto


Related tutorials

How to Replace the Cup Holder on a Saab 9-7X
How to Replace the Cup Holder on a Saab 9-7X
Saab 9 7x (2005-2009 / MK 1) To replace the cup holder on a Saab 9-7X, use a plastic trim removal tool and a star screwdriver. The cup holder can be replaced with either an origi…
How to remove the radio from the Saab 9-7x?
How to remove the radio from the Saab 9-7x?
Saab 9 7x (2005-2009 / MK 1) If you prefer to keep up with technology, replacing the original radio is essential, as it has its age and limitations. With patience and supported b…
Installing an Additional Radiator for the Automatic Transmission
Installing an Additional Radiator for the Automatic Transmission
Saab 9 7x (2005-2009 / MK 1) The video shows the installation of an additional radiator for cooling the automatic transmission. It highlights the precautions taken in positioning…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos