Do it yourself
Frequently asked questions about cars and motorcycles

Aux Output Installation Instructions

Model: Saab 9 3 MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Accessory kit

See other generations:
Video tutorial

To install the Aux output cable, detach the monitor located under the car radio and the climate control panel positioned beneath the radio by disconnecting the connectors attached to it. Remove and extract the ashtray and the CD player by disconnecting the connectors from behind the latter: in the original wiring connector, there is a space to connect the Aux output cable.

Drill an appropriate diameter hole on the edge of the CD player frame to fix the Aux output jack; reconnect the connectors and reassemble everything in reverse order.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Saab 9 3 (2002-2014 / MK 2) To install an AUX input, you need to remove the original radio to connect the interface control unit of the input: you will need the appropriate extr…
Saab 9 3 (2002-2014 / MK 2) To connect your mobile phone and play music from it through the car radio, start by removing the radio. Unlock the radio with a flathead screwdriver,…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos