Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Leather Seat Restoration on Saab 9.3 Cabriolet

Model: Saab 9 3 MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Seat

See other generations:
Video tutorial

Heat, contact with clothing, and car wash detergents inevitably age the leather upholstery of seats. The first tip is to take care of your interiors using specific products for both cleaning and leather care to keep it hydrated and clean.

In any case, it is possible to restore these coverings: the process begins with a thorough cleaning of the surfaces, followed by sanding down any rough areas, using a filler paste for cracks, similar to putty, then applying anti-silicone, and finally repainting the surfaces with an appropriate dye.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Seats of the Saab 9-3?
How to Replace the Rear Seats of the Saab 9-3?
Saab 9 3 (2002-2014 / MK 2) To replace the rear seats of the Saab 9-3, lower the backrest by pressing the appropriate button from the boot. Next, using a spanner, loosen the sid…
How to Remove the Rear Seats from a Saab 9-3?
How to Remove the Rear Seats from a Saab 9-3?
Saab 9 3 (2002-2014 / MK 2) In this tutorial, you will see how to remove the rear seats from a Saab 9-3, a very simple operation. For this, you will only need a long flat screwd…
How to Remove the Radio from a SAAB 9-3
How to Remove the Radio from a SAAB 9-3
Saab 9 3 (2002-2014 / MK 2) Before you can begin, sit in the driver's seat of your SAAB 9-3. Start by unclipping and removing the air vents located above the radio using a flath…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos