Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Fan Control Unit Replacement

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Blower motor

If the cabin fan does not operate correctly or there is no change in airflow with varying fan speeds, the fault is likely in the fan control unit. This unit is located beneath the air duct, behind the central console: to access the duct, remove the glove compartment from the passenger side. Once the flap is opened, it is easy to access the fixing screws: remove the screws, unclip the side cover of the dashboard, and detach the glove compartment. Next, to access the fixing screws of the control unit, you also need to remove the plastic cover underneath: at this point, you can replace the control unit and check the correct operation of the fan before reassembling everything.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Saab 9 3 (1998-2003 / MK 1) Cleaning the cabin air filter is absolutely essential to avoid the unpleasant smell often noticed when first turning on the air conditioning. Therefo…
Replacing Front Headlight Bulbs
Replacing Front Headlight Bulbs
Saab 9 3 (2002-2014 / MK 2) To replace the left front headlight bulb, first remove the air filter housing; then remove the rubber cap behind the headlight, disconnect the connec…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Saab 9 3 (2002-2014 / MK 2) The cabin air filter is located in the engine compartment, on the passenger side. Open the front bonnet and ensure it is securely supported. Remove t…

Other guides you may be interested in

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos