Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the Dashboard Centre Console

Model: Saab 9 3 MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Dashboard

See other generations:
This video is currently unavailable

Using a plastic spatula, detach the climate control console and disconnect the connector by first removing the locking clip. With the aid of two plastic spatulas, remove the central air vent ducts: at this point, you can unscrew the two screws securing the radio and pull it out of its housing, disconnecting the connector attached to it. Next, detach and remove the switch panel located just below the radio, which also contains the cup holder: to detach the securing tabs, access from above, through the radio compartment.

Proceed in reverse for reassembly.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Cabin Fan Control Unit Replacement
Cabin Fan Control Unit Replacement
Saab 9 3 (2002-2014 / MK 2) If the cabin fan does not operate correctly or there is no change in airflow with varying fan speeds, the fault is likely in the fan control unit. Th…
Steering Wheel and CIM Module Disassembly Instructions
Steering Wheel and CIM Module Disassembly Instructions
Saab 9 3 (2002-2014 / MK 2) The first operation is to adjust the steering wheel fully down and out to facilitate disassembly. Then, disconnect the airbag container: behind the s…
How to remove the dashboard instrument cluster of the Saab 9-3
How to remove the dashboard instrument cluster of the Saab 9-3
Saab 9 3 (2002-2014 / MK 2) In these brief and simple steps, you will see the procedure for removing and replacing the dashboard instrument cluster of the Saab 9-3. First, get i…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos