Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the interior rearview mirror on the Saab 9-3 and 9-5

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Rearview mirror

Let's see in this video how to remove and replace the interior rearview mirror on a Saab 9-3, but also on the 9-5, in simple steps. First we get inside the car and start by removing the ceiling light of the passenger compartment; to do this we leverage with something subtle, as shown in the video. At this point we unscrew the fixing screws that we find below and disconnect the electrical connector of the bulbs; we just have to unscrew the three fixing screws to remove the interior rearview mirror. Reverse the procedure for reassembly!

Posted on 11 March 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Saab 9 3 starter motor.
Replacement of the Saab 9 3 starter motor.
Saab 9 3 (2002-2014 / MK 2) Today's guide will show us the steps that will allow us to disassemble and replace the starter motor of the Saab 9 3. First, we lift the vehicle on t…
How do you replace the spark plugs on the Saab Nine-Three?
How do you replace the spark plugs on the Saab Nine-Three?
Saab 9 3 (2002-2014 / MK 2) To be able to replace the spark plugs on the Saab 9-3, you have to open the hood and remove the plastic cover from the top of the engine. With a torx…
How to disassemble the car radio of a SAAB 9 3
How to disassemble the car radio of a SAAB 9 3
Saab 9 3 (2002-2014 / MK 2) Before we are able to start, we will have to go and sit in the driver's seat of our SAAB 9-3. So let's start by disengaging and removing the air vent…

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos