Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 3
    4. : Replacement of the Saab 9 3 starter motor.

Saab 9 3 - Video tutorial

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Starter motor
Operation: Replacement of the Saab 9 3 starter motor.

Today's guide will show us the steps that will allow us to disassemble and replace the starter motor of the Saab 9 3. First, we lift the vehicle on the front side and start by disconnecting the battery as a precaution. Then, we use a 14 mm socket wrench to unscrew the fastening screws of our starter motor, disconnect the electrical wiring to remove it, as shown in the video. At this point, we proceed to install the new original starter motor, securing it properly and making the electrical connection. Then, we reassemble everything!


Posted on 15 November 2023 by ScegliAuto

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos