Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 5
    4. : How do you replace the starter motor on the Saab Nove Cinque?

Saab 9 5 - Video tutorial

Model: Saab 9 5 MK 1, Ys3e - Years 1997-2010
Part: Starter motor
Operation: How do you replace the starter motor on the Saab Nove Cinque?

To be able to replace the starter motor of the Saab 9 5 you have to go to open the hood and access the components below, as the starter motor is located right in the front of the engine block. This will be fixed to its mounts via some 10mm screws and some 12mm screws. Furthermore, to remove it, it will be necessary to disconnect the connectors connected to it. Once the screws have been loosened and the connectors disconnected, it will be possible to extract the motor from inside its housing and replace it with a new spare part.


Posted on 27 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos