Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rust from Your Car's Bodywork

Model: Saab 900 MK 2 - Years 1993-1998
Part: Body

There are many reasons why rust can form on a car's bodywork. A small rust spot, if not treated properly and promptly, will expand over time. To carry out this operation, it is advisable to wear safety equipment, including gloves, protective goggles, and a mask. During the work, paint will be lifted, which should not come into contact with your eyes. The correct solution will involve covering the entire surface of the car evenly. The paint around the rusted area can be removed using a sander that allows you to adjust the speed, and an angle grinder where the rust layer is very thick. The spray paint purchased and used should be left to dry for a full night.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Quick Installation of Wind Deflector Kit
Saab 900 (1993-1998 / MK 2) The thrill of wind in your hair when driving a convertible is a great feeling, but it can sometimes be problematic. To reduce the amount of wind, you…
Disassembly of disc brake pads on Saab 900
Disassembly of disc brake pads on Saab 900
Saab 900 (1993-1998 / MK 2) Let's replace the front brake pads of a Saab 900, let's see how they change. We lift the car on a jack up to the desired height, immediately after we…
How to Replace the Fuel Pump
How to Replace the Fuel Pump
Saab 900 (1993-1998 / MK 2) The fuel pump in the car is a mechanical component that is easily replaceable. The following guide shows the procedure to follow. You can access the …

How to Change the Solenoid Bleed Valve on a Mazda-6

Open the bonnet and secure it. Use pliers to remove the metal clamps from the hoses in the engine bay, then remove the valve from both ends and disconnect the power connector by hand. After comparing the damaged valve with the new one, fit it onto the hoses in the engine bay, securely tighten it with the metal clamps, and reconnect the connector. Test the car to ensure it is functioning correctly.

Watch the video!


by ScegliAuto

More videos