Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Samsung XM3?

Model: Samsung Xm3 MK 1 - Years 2019-2026
Part: Service warning light

In this tutorial, you will see how to reset the service light on the Samsung XM3, a very simple and quick operation to perform only after completing all the required maintenance tasks. First, insert the key and turn on the instrument cluster but do not start the engine. Then, using the buttons on the right side of the steering wheel, enter the vehicle information screen and scroll down until you find the remaining oil life. At this point, press and hold the "OK" button until the percentage resets to 100%.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Samsung Xm3 (2019-2026 / MK 1) The Samsung XM3 is the Korean twin of the Renault Arkana, which was born in Russia and has been marketed in Europe since September 2020. In Korea and…
Samsung Xm3 (2019-2026 / MK 1) As seen in this tutorial, replacing the battery in the Samsung XM3 remote is a very simple and inexpensive task. To do this, you will only need a rep…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos