Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Clutch on a Samsung SM3

Model: Samsung Sm3 L38 - Years 2009-2020
Part: Clutch

In this video tutorial, you will learn how to remove and replace the clutch discs on a Samsung SM3 by following the instructions below. First, open the hood of your car and start by removing the battery and engine mount, lifting the engine from below. Next, disconnect and remove the front axle by unscrewing the pin bolts, as shown in the video. Now, unscrew the bolts of the transmission case, separating it from the transmission. Remove the old clutch discs and replace them with new ones, following the video tutorial to the end!

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cabin air filter of the Samsung SM3.
Replacement of the cabin air filter of the Samsung SM3.
Samsung Sm3 (2009-2020 / L38) Today's instructions will show us how to disassemble and replace the cabin air filter of the Samsung SM3, in simple and quick steps. First, we get on…
How to Replace the Belt Tensioner on the Samsung SM3
How to Replace the Belt Tensioner on the Samsung SM3
Samsung Sm3 (2009-2020 / L38) In this guide, you will find instructions to remove and replace the serpentine belt tensioner on the Samsung SM3. First, raise the vehicle and remove…
How to Change the Spark Plugs on a Samsung SM3
How to Change the Spark Plugs on a Samsung SM3
Samsung Sm3 (2009-2020 / L38) Discover in this guide how to remove and replace the engine spark plugs on the Samsung SM3, following the instructions below. First, open the hood an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos