Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Seat Altea?

Model: Seat Altea MK 1 - Years 2004-2015
Part: Fuse box

Any fuse of the Seat Altea is located inside one of the two fuse boxes that are present inside the vehicle: the first of these is located behind the glove compartment, which is located on the dashboard bottom left relative to the steering column. Inside there will be fuses for the rear lights, the cabin heating radiator, etc. The second box will be located instead in the top right of the engine compartment: inside there may be fuses that deal with the operation of the acoustic warning system, lambda sensors, fog lights, etc.

Posted on 28 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Where are the Fuses Located in a Seat Altea?
Where are the Fuses Located in a Seat Altea?
Seat Altea (2004-2015 / MK 1) The fuses in a Seat Altea are housed within the designated fuse boxes installed in the vehicle: in this model, there are two boxes. The first is loca…
Where Are the Fuses Located on the Seat Altea?
Where Are the Fuses Located on the Seat Altea?
Seat Altea (2004-2015 / MK 1) The fuses on the Seat Altea are divided between two fuse boxes located within the vehicle. The first is positioned behind the glove compartment, whic…
Where are the Fuses Located on the Seat Altea?
Where are the Fuses Located on the Seat Altea?
Seat Altea (2004-2015 / MK 1) The fuse boxes of the Seat Altea contain the fuses that control the operation of the devices within the vehicle: the first will be located behind the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos