Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Seat Alhambra?

Model: Seat Alhambra MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light

See other generations:
Video tutorial

To remove the rear light on a Seat Alhambra, use a tool to pry off the trim panel located at the bottom of the corresponding light cluster. Once this panel is removed, proceed to loosen the screw underneath.

By loosening this screw, the light cluster will be freed from its housing and can be extracted by disconnecting the connector at the back. After the old light cluster has been removed, insert the new one, connecting and securing it properly.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Seat Alhambra?
How to Remove the Door Panel of a Seat Alhambra?
Seat Alhambra (2000-2010 / MK 1) To remove the door panel of a Seat Alhambra, use a tool to pry so that the window switch can be extracted from its housing: once the switch is remove…
How do you remove the door panel of the Seat Alhambra?
How do you remove the door panel of the Seat Alhambra?
Seat Alhambra (2010-2020 / MK 2) It will be possible to remove the door panel of the Seat Alhambra by prying with an object to detach the molding at the top of the device: once this …
How to Replace the Timing Belt on a Seat Alhambra?
How to Replace the Timing Belt on a Seat Alhambra?
Seat Alhambra (2000-2010 / MK 1) To replace the timing belt on a Seat Alhambra, open the bonnet to access the components located inside the engine compartment: on the left side of th…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos