Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs of the Seat Leon

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Tail light bulb

This short and simple guide will show us how to disassemble and replace the bulbs of the rear light of the Seat Leon. First, we open the rear hatch of the trunk and start unscrewing the side fixing screw, located on the inside; then we remove the light from the outside, disconnecting the electrical connector of the bulbs, as shown in the video. At this point, we replace any faulty bulbs with new ones, of the right type and with the same attachment; we reassemble the rear light and finally check the operation of all the bulbs!

Posted on 30 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Seat Leon
How to replace the rear headlight bulb of the Seat Leon
Seat Leon (1999-2005 / 1M) Today we will show you the steps to replace the rear headlight bulb of the Seat Leon. The steps to follow are: -open the trunk; -remove the inner sid…
How to Replace the Rear Light Bulb on a 2012 Seat Leon
How to Replace the Rear Light Bulb on a 2012 Seat Leon
Seat Leon (2005-2013 / 1P) If you want to replace the rear light bulb on your 2012 Seat Leon yourself, simply follow the steps outlined in this guide. First, ensure the car is …
How to Replace the Rear Light Bulb on a Seat León?
How to Replace the Rear Light Bulb on a Seat León?
Seat Leon (2012-2019 / MK 3, 5F) To replace the rear light bulb on a Seat León, open the boot lid to access the interior of the boot near the light. Here, move the carpet to locate t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos