Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key of the Seat Leon?

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

In order to program the key of the Seat Leon, you will need to insert the blank key into the corresponding ignition block: once the insertion is done, you can connect a diagnostic tool to the OBD port of the vehicle. The port is located on the dashboard just below the steering column: once the connection is established, you can select the model of the car and the corresponding version.

Then you can follow the instructions to verify that everything is working correctly.


Posted on 13 February 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Seat Leon
How to Replace the Key Battery of a Seat Leon
Seat Leon (2005-2013 / 1P) Before you start, open the physical key of your Seat Leon by simply pressing the silver button. Begin by prying off the rear cover of the key using a…
How to Replace the Key Battery of a Seat Leon
How to Replace the Key Battery of a Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) Start by extracting the physical key from your Seat Leon by pressing the silver button located at the top of the key. Once done, you need to unclip t…
How do you replace the battery of the Seat Leon remote control?
How do you replace the battery of the Seat Leon remote control?
Seat Leon (2012-2019 / 5F, MK 3) The key/remote control of your Seat Leon no longer opens the central locking system? It is very likely that the battery needs to be replaced, unless …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos