Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear shock absorbers of a Seat Leon 1

Model: Seat Leon 1M - Years 1999-2005
Part: Shocks

In this video we will see how to replace the rear shock absorbers of a Seat Leon 1: we lift the car and remove the tires, making sure that the wheels remain in their normal position; we remove the screw from the lower bracket, and then remove the two screws that fix the shock absorber from the top. On the workbench, we remove the upper protective cover, the mounting bracket and the dust cover, which we will reuse. We verify that the new shock absorber exactly matches the one we removed from the car, reassemble the upper support and the dust cover, tightening the screw to 2.5 Nm. We position the component so that we can put back the upper screws, to be tightened to 7.5 Nm and the lower one to 6 Nm. We can put the tire back on and proceed to the other side. Then check the alignment of the steering angles.

Posted on 23 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the shock absorbers of the Seat Leon 1
How to replace the shock absorbers of the Seat Leon 1
Seat Leon (2005-2013 / 1P) Today we will explain how to replace the shock absorbers of the Seat Leon model 1. We start the replacement by turning off the car, pulling the handb…
Guide to disassembling the rear bumper of the Seat Leon
Guide to disassembling the rear bumper of the Seat Leon
Seat Leon (2005-2013 / 1P) Today's main instructions will show us how to disassemble and replace the rear bumper of the Seat Leon. First, we open the rear hatch of the trunk an…
Can the tyre pressure reset be done in the Seat Leon?
Can the tyre pressure reset be done in the Seat Leon?
Seat Leon (2005-2013 / 1P) Noticing the tyre warning light on a vehicle means there is a specific issue with the inflation pressure, mainly due to a puncture, a flat tyre, or, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos