Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery replacement for Seat Ibiza 1.2

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Battery

Below we will see the main instructions that will allow us to disassemble and replace the battery of the Seat Ibiza 1.2 vehicle. First, we open the hood of the car and start by disconnecting both battery terminals (positive and negative); then we unscrew the fixing screw of the battery bracket to remove it from its compartment, as shown in the video. At this point, we install the new battery, of the correct type and with the same amperage; we reassemble and connect the battery, inserting it into the engine compartment in the correct direction, then starting the engine.

Posted on 24 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) Replacing the battery of the remote for the Seat Ibiza, as shown in this tutorial, is an extremely simple and quick operation. For this, you will nee…
How to Replace the Remote Battery for the Seat Ibiza?
How to Replace the Remote Battery for the Seat Ibiza?
Seat Ibiza (2017-2026 / 6F, KJ) In this tutorial, learn how to replace the remote battery for the Seat Ibiza, a very simple and quick operation. You will need a small flathead screw…
How to replace the remote battery on the Seat Ibiza?
How to replace the remote battery on the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) To replace the battery in the remote of the Seat Ibiza, use an object to pry off the top part, which is attached to the key. Once the part with the k…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos