Do it yourself
Frequently asked questions about cars and motorcycles

Replace the Gear Knob on a Seat Alhambra

Model: Seat Alhambra MK 1 - Years 2000-2010
Part: Power window switch

Want to replace the gear knob on a Seat Alhambra? Follow these steps for removal: use a plastic lever to detach the leather gaiter frame (release the metal clip), grasp the knob with both hands and pull it upwards (a strong and decisive movement) until it is removed from the gear stick. To install: take the new knob and slide it onto the stick (tighten it until the end of the thread of the lever) and fit the new gaiter, positioning it on the centre console. Finally, test the movement of the stick on the centre console to ensure the knob is correctly fitted.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Alhambra (2000-2010 / MK 1) Let's look at replacing the handle on the Seat Alhambra. Open the door of the Seat Alhambra and locate the parts to disassemble. Unscrew the screw lo…
Seat Alhambra (2000-2010 / MK 1) To replace the front headlight bulb on a Seat Alhambra, lift the flap located inside the wheel arch corresponding to the bulb you wish to replace. By…
Seat Alhambra (2010-2020 / MK 2) To replace the battery of the Seat Alhambra, open the bonnet to access the components located inside the engine bay. The battery is located immediate…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos