Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Seat Leon?

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Service warning light

You can reset the Service light that appears on the instrument panel of the Seat Leon by pressing and holding the 0.0/SET button located in the centre of the instrument panel while it is off. While continuing to hold this button, insert the ignition key into the corresponding slot and turn it: this will allow you to keep the button pressed for a few seconds until the Service light is reset. Once the reset has been successfully completed, you can turn off the instrument panel by removing the key.

Posted on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Seat Leon 2
How to reset the service light on the Seat Leon 2
Seat Leon (2005-2013 / 1P) To manually reset the service light of your Seat Leon second series, you must follow the procedure described in our new guide. First of all, enter th…
How to Reset the Service Light in a Seat Leon?
How to Reset the Service Light in a Seat Leon?
Seat Leon (2005-2013 / 1P) The procedure to reset the service light in a Seat Leon begins with the vehicle turned off. Looking at the centre of the instrument panel, find a but…
Resetting the service light on the Seat Leon.
Resetting the service light on the Seat Leon.
Seat Leon (2005-2013 / 1P) Today we will see how to reset the maintenance service light for the oil change in the Seat Leon. First, get into the car and start by pressing and h…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos